What I want to share with you today is that I recently got a new toy about our lavalier microphone. I believe most of the creators have seen it before, but there is a piece on the body. This is this little Rode. This microphone is a first-generation microphone. He has a second-generation microphone. I have been using it for more than a year. Frankly speaking, this microphone is very easy to use. It has many applications. Two or three bars also have a small mini mic like this one, which is a lavalier microphone. The wireless one is also a pair of two. I got one of them today. This LENSGO lavalier wireless microphone is here. All the names are here. So today I will share with you this group of videos. What are the differences and advantages of the Rode I used before? Of course, I will also show you what his recorded sound looks like. This is LENSGO. There is a switch on the side of the case that is stored together. It is all put together inside. Let me tell you something first. When I used RODE before, he had a receiver and his transmitter that bothered him. If you If you want to charge the power, you need to use two separate types-c, but this LENSGO directly integrates it. There is an interface here. After you connect it, I will try it here and show you that he will put all of it at once. Did you see that after you plugged it in, it has already started to glow on the top of the battery? After charging the two cameras, the battery is also charging. Is it possible to charge three things at one time, so it is super convenient to charge the battery, but his shell is The plastic feel is a bit heavy, but it doesn't matter to me because it is mainly a storage function and a charging function. I have used it a few times, and on his side there are two microphones and this side , a host, when you get this, it will have two kinds of connecting lines and a magnet head here. There are two kinds of connecting lines. The red one here is used by ordinary cameras. Then he is like this on both sides, that is, the left and right channels are connected to a ground. If you want to connect a mobile phone, it is recommended to change this group and put this end on the receiver, and then this one is to be used for your mobile phone. It is used because the headphone jack of the mobile phone usually has a microphone in addition to the left and right channels, so it is necessary to use this one to connect it and there will not be some strange problems. These two are exactly the same. The above model I haven't torn it off yet. Look at this side. He has two contacts here. These two contacts are connected to the grounding box when charging. There is also this rabbit hair on the top, and he has used this rabbit hair before. RODE should all know that it is super easy to fall off and is not easy to install. This is a little improvement. You can directly open it from the side and open it, and you can see the microphone body. This is removed and installed. When I go back, it's actually the same as it is locked and pushed down. Basically, you don't want to pull it hard. It's unlikely that it will fall off. You should have seen it when it was just opened. In addition to the microphone receiving hole, he can also connect a mini mic by himself. If you think this thing is too big to hang on your body, you can buy an additional wireless microphone and connect this end so that you can use it. There is another feature of the microphone body. Have you seen that there is a REC button on the side of the microphone. After you turn it on, it will be on the side of him. He can also install a small micro sd memory card on his side. It can also record itself when it becomes his main body. Then press and hold the REC button, and then it starts to flash, which means that he has started recording. So if you are recording today, the reception signal is not good. When you are in post-production, there will also be a file in it that can be used to remedy you, but it is used to remedy when you really can't receive sound. And the third feature of this fuselage base is that it can be rotated here. Rotation and then also a clip, but what's more powerful is that this one is detachable. He has a piece of magnet behind it, and it is sucked on it like this. If you don't want to use the clip and want to use the suction, you can also suck it like this. I got up or did I see it in the accessories just now. There is a piece of iron here that can also be used for him to suck on it. If you want to suck it directly through the clothes, or there is actually a piece of iron behind him. Double-sided tape, you have to stick it anywhere and then suck this on it and directly stick it on the thing you want to stick to and record it. You are OK like this. This is his receiver. There will be a power button on it to charge. There are two more holes here. The volume increase and decrease is the volume of the sound you receive. It needs to be louder or quieter. It is controlled from this. It is now connected. The microphone end is here except for the recording button. The power button of the power button, click here, it will turn into silent mode, like if you click it, it will turn into the mode of receiving sound, and then it will show how much power is left on your microphone terminal and how much power is left on the host computer. I just said that there is a volume adjustment, and you see the 0 in the middle. If you think the incoming sound is too low, you may increase or decrease it from the left side. There is also an output hole here. This output hole is used to directly pull it out. Just plug it into your camera or your radio equipment, mobile phone, etc. to use it. The whole group is put away and then your cable. The many slots here are for you to put it. For example, this is here. I'll keep him here for a few lines and take it out. It's very convenient to take a whole box out. After talking about so much, I'm going to show you the sound quality of his own microphone, since we want to compare the sound quality. So let's compare and test our new LENSGO microphone with our big brother RODE. First of all, it's the first sound you hear now. It's the sound recorded with this RODE wireless microphone for the first generation. I really It has been used for a long time, so he really has to say that the disadvantage is that if you want to charge the main unit and the microphone itself, you need to prepare two type-cs to charge separately. The second is the rabbit hair on him. In fact, it is very easy to fall off. When I went out with some creators to shoot a film before, I saw that they were hanging and hanging and accidentally dialed it, and the rabbit fur cover on the microphone fell directly. Otherwise, this is actually not bad. The second set of LENSGO, this LENSGO, I got it and I have actually used it a few times, including when I was working outside. It is actually better than the RODE one. I am not sure about the second generation because I really didn't get the second generation. The generation is only a little thicker than the first generation. I think most of the others have improved some of the troubles I encountered when using RODE before. Then there is his recording end. The above recording end is basically It can also ensure that I will not be afraid of poor reception when I am recording outside. When the camera does not receive sound and post-production, it will not save you. Now that you have listened to the comparison of the two sets of microphones, I will make a connection distance for him. The test is a simple test because we don't usually go very, very far. I came to this space in this office and found two people to help me measure the recording distance of the microphone. Hey, what's the matter? To the north, I thought you were going to say.. Wait a minute, I will put the camera in this place and invite them, Yangyang and Michelle, go here and go to the farthest place to see his radio distance. There won't be any problems, and then I'll go through behind that strange bunker in the middle to see if the sound will be cut off. I'm wearing today's outfit very well. He's mine. I'll take it away later. No, you have to remember which side the boot is on, oh see! Side - is that so, is there? Is there a click? Press it, press it, and hiccup it, you can get it Well, through the building through the building I'm going to open the door now I'm going to... - I'm going to climb the stairs now I'm sorry, there's someone inside I'm going to the back now - I didn't walk like this Well I'm going to the back okay I'm up in the sky now I'm flying oh black bear I'm in the sky - is there any sound now behind the building I'm up there now but I can't see anyone now I don't know what's going on - black bear I'm over your head How's it going - it's great to walk back normally. Is there a sound when I go to the back? Turn it off - Well, let me share about two with you. If I use this myself, there will be some tricks. The first one is that it has a microphone hole on it. You can connect a recording device independently, so you actually You can operate it like this. In addition to using this as a mini mic or a lavalier mic, if you have a special need for extra shooting, for example, if you want to hold a shotgun mic like this, you usually need to stretch a long strip below it. A long line can be connected to the camera like this, directly string it together with your pointing microphone, or string it with other external microphones, and record it directly into your camera in this way. This should indeed be there. Just press it on the main unit and press the volume + and - at the same time, you can divide your two microphones into two independent channels for recording For example, this one will be in the left channel and the other will be in the right channel. So when you are in post-production, you can divide the left and right channels into two separate audio tracks. It should be seen from the volume bar below that it is now an independent microphone, although the other track still has a little volume, but this has provided a lot of room for post-production adjustment, so I will take this out now Go outside and I've got another microphone to Tangtang who is working in the work area now. Tangtang, let's talk about it - Ann Anthony is fat or not - you are fat, Anthony is fat or not - you are fat, male shark.. Splitting into two tracks has another benefit like I occasionally run into at work where you need two wireless mics but when you might need to go into something like a mixer to adjust the volume you can Through this one is 3.5mm and then switch to two XLRs, commonly known as cannon head, it is divided into left and right channels and two tracks are inserted into your mixer, so that you can adjust the two receivers separately from the mixer. Although the volume is divided into two tracks, there will still be a little sound, but it is better than if you mix the two tracks directly, so there is absolutely no way to adjust the volume on both sides. It is much better than this. Before the end of the video, let me tell you that one of the things I found above was something I didn't expect. The memory card in it can only support 32GB. I originally inserted 128GB and 64GB, and then I found out that there is no such thing at all. Record it so if you want to use this independent radio function, remember to prepare 32GB, and the basic speed should not be too fast because the audio file of the recording is much smaller than the video file of the video, and if you use this set of microphones If you have any questions, please leave a message at the bottom of the video. Anyway, I will continue to use this. I will answer you one by one. Then we will see you in the next video. By the way, I will share with you that my room is really used as a workplace now. So it's very messy. I like this keyboard very much. I made it recently.